Policyholder-side appraisers serving all of Texas Mon – Fri: 9 AM – 6 PM Call a Professional Now: +1 (254) 421-5412
Free tool

Roof Square, Pitch & Waste Factor Calculator

Turn a building footprint and roof pitch into true roof squares, apply a waste factor, and check the quantities on your insurance estimate.

Squares to order (with waste)

0
  • Pitch multiplier0
  • True roof surface area0 sq ft
  • Measured squares (no waste)0
  • Shingle bundles (3 per square)0

Enter the squares from your estimate to compare.

What is a roofing square?

One roofing square equals 100 square feet of roof surface. Because roofs are sloped, the surface area is larger than the footprint — the pitch multiplier accounts for that. A 6/12 roof, for example, has about 12% more surface than its footprint.

PitchMultiplier
4/121.054
6/121.118
8/121.202
10/121.302
12/121.414

Why waste factor matters on insurance estimates

Shingles must be cut at hips, valleys, rakes and penetrations. Estimates that apply too little waste leave you short of material. Learn more in how roof waste factors affect insurance estimates and roof measurements for insurance claims.

Note: This tool gives planning estimates. Aerial reports or field measurements are needed for an accurate claim estimate.

Roof Square, Pitch & Waste Calculator FAQs

How many squares is my roof?

Multiply the footprint area (including overhangs) by the pitch multiplier to get the true surface area, then divide by 100. Add the waste factor to get the number of squares to order.

What waste factor do insurance companies use?

It varies by roof complexity. Simple gable roofs are often figured around 10%, hip roofs around 15%, and cut-up roofs higher. Estimates that use a flat low figure on complex roofs often come up short.

Do steep roofs cost more on an insurance estimate?

Often, yes. Estimating platforms commonly add steep and high-roof labor charges for steeper pitches and multi-story roofs. Check your estimate for these line items.

Numbers don’t add up?

TX Insurance Appraiser will review your carrier’s estimate free and tell you whether appraisal can close the gap.